Technical Standard and Packing Method

Wire in coils

diameter of wire
0.6mm-4.0mm

tolerance for wire diameter
±0.05mm

packing method
both ends marked, each spool wrapped with kraft paper, sealed, put into a polybag with drier.

Inner diameter
350mm

Tolerance for weight/spool 15Kg±10%

 Bars and roads

diameter of rod
0.8-5.0 mm

tolerance for rod diameter
±0.02mm

Packing method
Each 5kg±2% packed in a polybag vacuumed, enclosed with drier and quality certificate.

length of rod
13mm~1000mm

tolerance for rod length
±1.0mm

 Flat

Size

Packing method
Each 5kg±2% packed in a polybag vacuumed, enclosed with drier and quality certificate. 40kg/wooden case size58cm × 38 cm × 13 cm .

0.05’’X1/2”X20”~ 36”

 Ring

Size

tolerance for diameter of rod

tolerance for wire diameter 

平整度公差

Packing method
Each 5kg±2% packed in a polybag vacuumed, enclosed with drier and quality certificate.

wire diameter
1.0mm~ 2.0mm
inside diameter
8.0mm~20.0mm

Mechanism
±0.08mm
handing
±0.05mm

±0.02mm

±0.2mm

NoteGeneral technical standard and packing method are on the charts above; special requirements of the users may be possible.

 

 

Copyright:Seleno Brazing Alloys Manufacturing Co.,Ltd. Design by DOTS Digital